Keep It Green, LLC

Keep It Green's Base Control Panel is a simple control package that allows the system to start and run manually or automatically with a signal from the irrigation controller. It may be used with either submersible or above-ground pumps and can be mounted remotely from the tank and installed in your garage or basement (or it may be mounted right at the pump). This control panel is also designed to shut the tank pump off when the tank water level is too low and simultaneously signal for a switchover to city water and/or well water.

The Base Control with inputs and outputs is shown below:

The following features are included:

NEMA 4X rated fiberglass enclosure. 12"H X 10"W X 6"D
Manual/Off/Auto switch for pump control.
Lights to indicate pump run and low level shutdown.
Contactor and fuses to start and protect a single phase pump up to ½ HP.
Contacts for automatic start from irrigation controller or timer.
Level float to be mounted in cistern and shut down the pump on low level.
Contacts to signal the opening and closing of an alternate water supply valve when tank is empty.

This panel may also be customized to suit your needs. For example:

It can incorporate the use of 3 phase power for larger, higher capacity pumps.
Continuous level monitoring of your cistern tank and incorporating a digital panel display.
Continuous level monitoring by incorporating a multi-color bar graph with PC interface.
Incorporation of flow monitoring, chemical feed or water treatment components.

Please Contact Us for pricing...